The TL082BCD is a dual JFET-input operational amplifier from STMicroelectronics, packaged in an 8-SOIC (0.154", 3.90mm width) body for surface-mount assembly. The 3 MHz gain-bandwidth product and 13V/µs slew rate define the small-signal bandwidth and large-signal transient response. For a unity-gain buffer, the 3 MHz GBW sets a -3 dB closed-loop bandwidth of 3 MHz; at higher closed-loop gains the bandwidth scales down proportionally. The 13V/µs slew rate means a 10 V output step slews in about 770 ns — adequate for audio line-level signals and moderate-speed sensor outputs, but not for video or high-frequency PWM reconstruction.
TL082BCD
TL082BCD JFET Op-Amp, 13V/µs Slew Rate, 8-SOIC
MPNTL082BCD
Active
STMicroelectronics TL082BCD, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 1.4mA supply per channel, 8-SOIC package, commercial temperature range.
$1.5500Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | J-FET |
| Voltage - input offset | 2 mV |
| Voltage - supply span | 30 V |
| Current - supply | 1.4mA (x2 Channels) |
| Current - input bias | 30 pA |
| Current - output (Channel) | 10 mA |
| Operating temperature | 0°C~70°C |
| Gain bandwidth product | 3 MHz |
| Package | Tube |
| Slew rate | 13V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
Product details
Frequently asked questions
What is the difference between TL082BCD and TL082ACD?
Both are dual JFET op-amps in the same 8-SOIC package. The key difference is the input offset voltage grade: the TL082BCD carries a 2 mV typical offset specification, while the TL082ACD is a tighter-grade variant with a lower offset. For most AC-coupled or non-critical DC applications the BCD grade is sufficient; precision DC circuits that need sub-mV offset should select the ACD or an auto-zero amplifier instead.