Skip to main content
Log in
TL082ACDRG4

TL082ACDRG4 JFET Op-Amp, 13V/µs Slew Rate, SOIC-8

MPNTL082ACDRG4
End of Life

Texas Instruments TL082ACDRG4, dual J-FET op-amp, 3 MHz gain bandwidth, 13V/µs slew rate, 30 pA input bias, 10 V to 30 V supply, 0°C~70°C, 8-SOIC surface mount, Tape & Reel.

$0.4200Ref. price · indicative, final on quote
Texas Instruments TL082ACDRG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL082ACDRG4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias30 pA
Current - output (Channel)10 mA
Operating temperature0°C~70°C
Gain bandwidth product3 MHz
PackageTape & Reel (TR)
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

The 13V/µs slew rate and 3 MHz gain-bandwidth product give this part enough large-signal bandwidth for audio-frequency active filters, fast control loops, and signal conditioning up to the low hundreds of kilohertz — well beyond the reach of a general-purpose 1 MHz op-amp.

Rated for a supply span of 10 V to 30 V, the TL082ACDRG4 works from split ±5 V to ±15 V rails or a single-ended supply up to 30 V. Each of the two channels draws 1.4 mA supply current, keeping the total quiescent draw under 3 mA for the dual package.

This makes it a safe choice for new BOM entries and ongoing production builds — no forced redesign horizon.

Frequently asked questions

TL082ACDRG4 vs TL082ACD — what is the difference?

The TL082ACDRG4 and TL082ACD share the same die and electrical ratings. The difference is packaging: the TL082ACDRG4 ships in Tape & Reel (automated assembly), while the TL082ACD ships in tubes. The base product number TL082 is identical.

What is the closest pin-compatible alternative to TL082ACDRG4?

Within the TL082 family, the TL082ACD is the same device in tube packaging. For a wider second-source option, the NJM082D from JRC or the LF353 from Texas Instruments are pin-compatible dual JFET op-amps with similar 3 MHz GBW and 13V/µs slew rate — verify the supply range and offset voltage for your specific application.