Skip to main content
Texas Instruments TL081CPSR — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TL081CPSR JFET Op-Amp, 3 MHz, 13 V/µs, 8-SOIC

MPNTL081CPSR
End of Life

Texas Instruments TL081CPSR, JFET-input operational amplifier, single circuit, 3 MHz gain bandwidth, 13 V/µs slew rate, 7–36 V supply, 8-SOIC package, 0°C to 70°C.

$0.65Ref. price · indicative, final on quote
TL081CPSR datasheet
Packaging8-SOIC (0.209", 5.30mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TL081CPSR Technical Specifications
ParameterValue
Mounting typeSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span36 V
Current - supply1.4mA
Current - input bias30 pA
Operating temperature0°C ~ 70°C
Gain bandwidth product3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate13V/µs
Case8-SOIC (0.209\", 5.30mm Width)
Number of circuits1

Product details

Active production — no LTB risk

The TL081CPSR carries an Active lifecycle status and is ROHS3 compliant. There is no last-time-buy or end-of-life notice on this part. For new designs or production BOMs, it remains a safe choice without obsolescence pressure.

Sourcing and availability

This part is sourced through independent distribution and quoted to order against an RFQ. Availability and current pricing are confirmed at quote time. The listed package options are Tape & Reel (TR) and Cut Tape (CT).

Frequently asked questions

Is TL081CPSR RoHS compliant?

Yes, TL081CPSR is ROHS3 compliant.

What is the slew rate of TL081CPSR?

The slew rate is 13 V/µs.

When sourcing TL081CPSR, what's the closest functional second-source?

The TLV9351IDCKR is a functional alternative with a 3.5 MHz GBW, 20 V/µs slew rate, rail-to-rail output, and wider temperature range, but it is not a direct pin-for-pin replacement — verify the pinout and supply range for your design.