Skip to main content
Texas Instruments TL074ING4 — Analog & Data Acquisition

TL074ING4 JFET Op-Amp, 3 MHz, 13V/µs, 14-DIP

MPNTL074ING4
End of Life

Texas Instruments TL074ING4, JFET quad operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 65 pA input bias, 14-DIP through-hole package, -40°C to 85°C temperature range.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL074ING4 specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x4 Channels)
Current - input bias65 pA
Operating temperature-40°C~85°C(TA)
Gain bandwidth product3 MHz
PackageTube
Slew rate13V/µs
Case14-DIP (0.300\", 7.62mm)
Number of circuits4

Product details

JFET input stage — 65 pA bias current

The TL074ING4 is a quad JFET-input operational amplifier from Texas Instruments, part of the TL074 series. Its 65 pA typical input bias current and 3 mV input offset voltage make it a natural fit for high-impedance signal conditioning — photodiode amplifiers, piezo sensor buffers, and precision integrators where bipolar input stages would load the source.

Slew rate and bandwidth — 13V/µs at 3 MHz

With a 13V/µs slew rate and 3 MHz gain-bandwidth product, this op-amp handles audio-band signals and moderate-speed control loops without slew-induced distortion.

Frequently asked questions

Is TL074ING4 a direct replacement for TL074CN?

Check the temperature grade of your existing BOM line before substituting — the ING4 is the wider-temperature variant.