It remains a current-production choice for new designs and replacement builds alike.
13V/µs slew rate and 3 MHz GBW — what they mean for signal conditioning
With a 13V/µs slew rate and 3 MHz gain-bandwidth product, this quad JFET op-amp handles audio-band signals and moderate-speed sensor outputs without slew-induced distortion. The 13V/µs rate supports full-output swings up to roughly 200 kHz before the slew rate limits the large-signal bandwidth — adequate for audio preamps, active filters, and data-acquisition front ends.
Supply current and voltage range — fitting the rail budget
Each of the four amplifiers draws 1.4 mA, so the total quiescent supply current is 5.6 mA for the package. That is low enough to run from a 10 V to 30 V single supply (or ±5 V to ±15 V split rails) without burning the thermal budget in a 14-SOIC layout. The 3 mV typical input offset voltage is unremarkable for a general-purpose JFET op-amp; if the application demands sub-mV offset, a precision-grade sibling in the TL07x family would be the better fit.