Skip to main content
Log in
Texas Instruments TL074ACDRE4 — Analog & Data Acquisition

TL074ACDRE4 Texas Instruments JFET Quad Op-Amp

MPNTL074ACDRE4
End of Life

Texas Instruments TL074ACDRE4, JFET-input quad operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 1.4 mA supply per channel, 0°C to 70°C, 14-SOIC package, Tape & Reel.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL074ACDRE4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x4 Channels)
Current - input bias65 pA
Operating temperature0°C~70°C(TA)
Gain bandwidth product3 MHz
PackageTape & Reel (TR)
Slew rate13V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Four JFET op-amps in one SOIC-14

The TL074ACDRE4 is a quad JFET-input operational amplifier from Texas Instruments, packing four independent amplifiers into a single 14-SOIC package. Each channel draws 1.4 mA supply current and delivers a 3 MHz gain-bandwidth product with a 13V/µs slew rate.

13V/µs slew rate — what it buys you

At 13V/µs, the TL074ACDRE4 can swing 10 V peak-to-peak up to roughly 200 kHz before slew-rate limiting distorts the output. That covers audio-band processing, active filters below 100 kHz, and general-purpose signal chains where the bandwidth of a 3 MHz GBW part is available but the large-signal settling matters.

Frequently asked questions

What is the exact difference between TL074ACDRE4 and TL074ACDR?

The difference is the packaging suffix: TL074ACDRE4 is supplied in Tape & Reel, while TL074ACDR is typically shipped in tubes or on a different reel format. The die, the electrical specifications, and the SOIC-14 package are identical. Both are active and RoHS-compliant.

How many channels does TL074ACDRE4 have?

Four independent JFET-input operational amplifiers in a single 14-SOIC package. Each channel shares the same supply rails but operates independently.