Skip to main content
Log in
Texas Instruments TL072IPG4 — Analog & Data Acquisition

TL072IPG4 J-FET Op-Amp, 3 MHz GBW, 13 V/µs Slew Rate, 8-PDIP

MPNTL072IPG4
End of Life

Texas Instruments TL072 series, J-FET Amplifier, 2 Circuit, 8-PDIP (0.300", 7.62mm), Through Hole, Slew Rate 13V/µs, Gain Bandwidth Product 3 MHz, Supply Current 1.4mA (x2 Channels), Operating Temperature -40°C~85°C.

$0.9500Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072IPG4 specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias65 pA
Operating temperature-40°C~85°C(TA)
Gain bandwidth product3 MHz
PackageTube
Slew rate13V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

The TL072IPG4 is a dual J-FET input operational amplifier from Texas Instruments in the TL072 family. Each of the two amplifiers draws 1.4 mA supply current, so the whole package consumes 2.8 mA quiescent — low enough for multi-channel boards without a thermal headache.

That covers audio-band signals cleanly and leaves headroom for fast-settling analog multiplexers or sample-and-hold stages.

That covers most bench, lab, and factory-floor environments without needing a military-grade part. Input bias current is 65 pA typical — the J-FET front end keeps the DC error low even with high-source-impedance sensors or feedback networks.

Package and mounting — through-hole still has a place

Housed in an 8-pin PDIP (0.300-inch body), the TL072IPG4 is a through-hole part. That means hand-prototyping, breadboarding, and socketed test fixtures are straightforward.

Frequently asked questions

Can I use TL072IPG4 instead of TL072CP?

The TL072IPG4 and TL072CP are functionally identical — same dual J-FET amplifier, same 3 MHz GBW, same 13 V/µs slew rate, same 8-pin DIP footprint. The suffix difference usually reflects packaging or environmental rating; verify the operating temperature range matches your application. Both are active, so either can be sourced.

What is the equivalent of TL072IPG4?

The TL072 family includes multiple suffix variants (TL072CP, TL072IP, TL072ACD, etc.) that are pin-compatible and electrically equivalent. The TL072IPG4 is the through-hole PDIP version with industrial temperature range. Any TL072 variant in the same package and temperature grade is a direct substitute.