Skip to main content
Log in
Texas Instruments TL072IPE4 — Analog & Data Acquisition

TL072IPE4 J-FET Op-Amp, 3 MHz GBW, 13 V/µs Slew Rate, DIP-8

MPNTL072IPE4
Active

Texas Instruments TL072IPE4, dual J-FET operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 1.4 mA per channel supply current, 8-DIP through-hole package, industrial temperature range -40°C to 85°C.

$1.4400Ref. price · indicative, final on quote
Texas Instruments TL072IPE4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072IPE4 specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias65 pA
Operating temperature-40°C~85°C(TA)
Gain bandwidth product3 MHz
PackageBulk
Slew rate13V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual J-FET op-amp in an 8-pin DIP

The TL072IPE4 is a dual J-FET input operational amplifier from Texas Instruments, housed in an 8-pin PDIP package for through-hole assembly.

Parametric fit for signal-chain designs

Each of the two amplifiers draws 1.4 mA supply current, keeping the total quiescent draw under 3 mA for the dual package — a practical choice for multi-channel boards where thermal budget matters. The J-FET input stage holds input bias current at 65 pA typical, which preserves signal integrity in high-impedance sensor interfaces and photodiode amplifiers where bias current error would otherwise dominate the offset.

Frequently asked questions

Can TL072IPE4 be used as a drop-in replacement for TL072CP?

The TL072IPE4 shares the same dual J-FET amplifier core and 8-pin DIP footprint as the TL072CP. Electrically they are interchangeable, but verify the temperature requirement of your application before substituting.