JFET op-amp with 13 V/µs slew — still the workhorse for audio and precision analog
It pairs a 3 MHz gain-bandwidth product with a 13 V/µs slew rate, giving it enough speed for audio processing, active filters, and moderate-speed signal conditioning without the instability headaches of faster parts. Input bias current sits at 65 pA typical, so it won't load high-impedance sources like piezo sensors or photodiode preamps. The supply range runs from 10 V to 30 V total — comfortably covering ±5 V to ±15 V split rails — and each of the two channels draws 1.4 mA quiescent current. Package is an 8-TSSOP (4.40 mm wide) for surface-mount assembly.
The TL072CPWR operates from a total supply span of 10 V minimum to 30 V maximum. That translates to split supplies from ±5 V up to ±15 V, or a single-ended rail from 10 V to 30 V. If your existing board runs on ±12 V or ±15 V, this part drops in without a rail change.
For a procurement buyer, that means the part remains a safe line-item for both new production and field repairs — no rush to qualify a substitute. We source it through independent distribution and quote firm against an RFQ.
8-TSSOP package — surface-mount, field-swappable with care
The 8-TSSOP body (0.173" wide, 4.40 mm) is a standard surface-mount footprint. No exposed pad, no special thermal management needed at the 1.4 mA per-channel draw. The tape-and-reel or cut-tape options mean you can order small quantities for bench stock without committing to a full reel.