Skip to main content
Log in
Texas Instruments TL072CPSRE4 — Analog & Data Acquisition

TL072CPSRE4 JFET Op-Amp, 3 MHz GBP, 13V/µs Slew Rate

MPNTL072CPSRE4
End of Life

Texas Instruments TL072CPSRE4, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 1.4 mA per channel supply, 8-SOIC surface-mount package, 0°C to 70°C commercial temperature range.

Texas Instruments TL072CPSRE4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072CPSRE4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias65 pA
Operating temperature0°C~70°C(TA)
Gain bandwidth product3 MHz
PackageTape & Reel (TR)
Slew rate13V/µs
Case8-SOIC (0.209\", 5.30mm Width)
Number of circuits2

Product details

JFET-input dual op-amp for signal conditioning

The 13V/µs slew rate sets the large-signal bandwidth ceiling: at 20 V peak-to-peak output swing, the full-power bandwidth is roughly 100 kHz, adequate for audio-band and low-frequency signal conditioning. The 3 MHz GBP supports gains up to 100× with usable bandwidth into the tens of kilohertz. The 3 mV typical input offset voltage is unremarkable for a general-purpose JFET op-amp; designs requiring sub-millivolt precision should budget for the TL072's offset spec or plan a trim.

The TL072CPSRE4 operates from a 10 V to 30 V total supply span — ±5 V to ±15 V dual supplies, or a single-ended rail up to 30 V.

Frequently asked questions

What is the difference between TL072CPSRE4 and TL072CP?

The TL072CPSRE4 is the surface-mount variant (8-SOIC, Tape & Reel) of the same TL072 dual JFET op-amp die. The TL072CP is the through-hole DIP-8 version. Electrically they share the same 3 MHz GBP, 13V/µs slew rate, and 65 pA input bias — the difference is the package and mounting method.