Skip to main content
Log in
Texas Instruments TL072CPE4 — Analog & Data Acquisition

TL072CPE4 JFET Op-Amp, 13V/µs Slew Rate, PDIP-8

MPNTL072CPE4
End of Life

Texas Instruments TL072CPE4, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 65 pA input bias current, 1.4 mA per channel supply, 0°C to 70°C, 8-pin PDIP through-hole package.

$1.4400Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072CPE4 specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias65 pA
Operating temperature0°C~70°C(TA)
Gain bandwidth product3 MHz
PackageTube
Slew rate13V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

JFET input stage — 65 pA bias current

The TL072CPE4 is a dual JFET-input operational amplifier from Texas Instruments. The JFET front end delivers a typical input bias current of 65 pA, which is orders of magnitude lower than a general-purpose bipolar op-amp. This makes the part a natural fit for high-impedance signal conditioning — photodiode amplifiers, pH probe buffers, piezoelectric sensor interfaces — where bias current errors would otherwise swamp the signal.

13V/µs slew rate — dynamic response for audio and control loops

The 13V/µs slew rate and 3 MHz gain-bandwidth product support audio-frequency signal chains.

The supply span covers 10 V to 30 V total. The 3 mV typical input offset voltage is tight enough for most precision DC-coupled stages.

Frequently asked questions

What is the difference between TL072CPE4 and TL072CP?

The TL072CPE4 and TL072CP are functionally identical — same JFET input stage, same 3 MHz GBW, same 13V/µs slew rate, same PDIP-8 package. The '' suffix is a TI-specific ordering code that typically indicates a specific packaging or environmental compliance variant (e.g., lead-free / RoHS). The electrical specifications are the same; either can be used as a drop-in replacement in the same socket.