Skip to main content
Log in
TL072CDG4

TL072CDG4 JFET Op-Amp, 13V/µs Slew Rate, 8-SOIC

MPNTL072CDG4
Last Buy

Texas Instruments TL072CDG4, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 65 pA input bias, 1.4 mA per channel supply, 8-SOIC surface mount, 0°C to 70°C operating temperature.

$0.5659Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072CDG4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias65 pA
Operating temperature0°C~70°C(TA)
Gain bandwidth product3 MHz
PackageTube
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual JFET op-amp with 13V/µs slew rate

Last Buy — plan the BOM transition

That means TI has announced end-of-life and the final purchase window is open — once it closes, no more orders through the factory. If this part is on your BOM, the immediate decision is whether to buy lifetime buy quantities now or qualify a replacement before the window shuts. The TL072 family has multiple active siblings (e.g., TL072B, TL072AC) that share the same pinout and 8-SOIC footprint, but the exact replacement depends on your offset and noise budget — the CDG4 variant is the commercial-temperature, standard-grade trim. A direct swap needs datasheet cross-checking against your application's input offset voltage and supply range.

Supply span and temperature envelope

Rated for a supply span of 10 V to 30 V (single or split supplies), the TL072CDG4 runs on ±5 V to ±15 V rails. The 8-SOIC footprint is standard across the TL072 family, so a board designed for the CDG4 will accept any pin-compatible sibling without a layout change.

Frequently asked questions

Is the TL072CDG4 obsolete?

The TL072CDG4 is in Last Buy status — TI has announced discontinuation, but the final purchase window is still open. Once it closes, the part will be obsolete through the factory channel. Sourcing through independent distribution remains possible after that date, subject to available inventory.

What is the replacement for the TL072CDG4?

No official replacement order code is listed. The TL072 family includes several active variants (TL072B, TL072AC, TL072ID) in the same 8-SOIC package and pinout. The key difference is input offset voltage grade and temperature range — check your design's offset budget before swapping. For a direct drop-in, compare the offset spec against the CDG4's 3 mV maximum.