Skip to main content
Log in
TL072ACDRG4

TL072ACDRG4 JFET Op-Amp, 13 V/µs Slew Rate, 8-SOIC

MPNTL072ACDRG4
End of Life

Texas Instruments TL072ACDRG4, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 10 V to 30 V supply, 8-SOIC package, 0°C to 70°C temperature range.

$0.9200Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072ACDRG4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias65 pA
Operating temperature0°C~70°C(TA)
Gain bandwidth product3 MHz
PackageTape & Reel (TR)
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Each of the two amplifiers draws 1.4 mA supply current, keeping the total quiescent draw under 3 mA for the whole package. That makes it a practical choice for multi-channel boards where the op-amp bank must not dominate the power budget.

The supply span runs from 10 V minimum to 30 V maximum, accommodating both split-rail (±5 V to ±15 V) and single-supply designs at 12 V or 24 V. This part is specified for indoor, temperature-controlled environments — office equipment, benchtop instruments, and consumer audio — not for automotive or outdoor industrial use without additional qualification testing.

Package and lifecycle

Housed in an 8-pin SOIC package (body 3.90 mm wide, 0.154" profile) and supplied on Tape & Reel for automated assembly. The G4 suffix indicates a halogen-free, RoHS-compliant finish, which satisfies the material declaration requirements for most commercial and industrial BOMs.

Frequently asked questions

Can TL072ACDRG4 replace TL072ACD?

Yes — TL072ACDRG4 is the Tape & Reel variant of the same base part (TL072). The die, package, and electrical ratings are identical; the only difference is the shipping medium (reel vs tube). A direct drop-in replacement for the TL072ACD in pick-and-place lines.

What is the difference between TL072ACDRG4 and TL072ACP?

The TL072ACP is the same dual JFET op-amp in a PDIP-8 through-hole package, while the TL072ACDRG4 is in an SOIC-8 surface-mount package. Electrical specs are the same; the choice is purely board-assembly method.