Skip to main content
Log in
TL072ACDRE4

TL072ACDRE4 JFET Op-Amp, 3 MHz GBW, 13V/µs Slew Rate, SOIC-8

MPNTL072ACDRE4
End of Life

Texas Instruments TL072ACDRE4, dual JFET-input operational amplifier, 3 MHz gain bandwidth product, 13V/µs slew rate, 1.4mA supply per channel, 8-SOIC package, 0°C to 70°C temperature range.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072ACDRE4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias65 pA
Operating temperature0°C~70°C(TA)
Gain bandwidth product3 MHz
PackageTape & Reel (TR)
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual JFET op-amp for general-purpose signal conditioning

The 13V/µs slew rate supports full-power output swing up to roughly 200 kHz before slew-rate limiting distorts the waveform. For a 3 MHz GBW, closed-loop gains above 10× will begin to roll off below 300 kHz. These ratings place the TL072ACDRE4 in the general-purpose audio and instrumentation band — it is not intended for video or high-speed data acquisition, but it handles 20 kHz audio with ample headroom.

For extended-temperature or automotive applications, the TL072AID or TL072AQ variants with -40°C to 125°C rating would be the correct choice.

Frequently asked questions

What is the difference between TL072ACDRE4 and TL072CDR?

The 'A' suffix typically denotes tighter input offset voltage (3 mV max vs 6 mV for the standard grade). Verify the specific grade required by your design against the datasheet.