Skip to main content
TL072ACDE4

TL072ACDE4 JFET Op-Amp, 13V/µs Slew Rate, Last Buy

MPNTL072ACDE4
Last Buy

Texas Instruments TL072ACDE4, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 10 V to 30 V supply, 8-SOIC surface mount, commercial temperature 0°C to 70°C.

$1.5400Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072ACDE4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias65 pA
Operating temperature0°C~70°C(TA)
Gain bandwidth product3 MHz
PackageTube
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

TL072ACDE4 — JFET op-amp at end-of-life

This is the final production window — TI will not manufacture this specific suffix indefinitely. The TL072ACDE4 is the 8-SOIC, commercial-temperature, tube-packaged variant.

13V/µs slew rate — bench reality

The 13V/µs slew rate is the large-signal transient response — it determines how fast the output can swing from rail to rail. For a ±15 V supply, a full 30 V p-p output step settles in about 2.3 µs. This is fast enough for audio up to the upper audible band and for moderate-speed signal chains, but it will distort fast pulse trains or high-frequency square waves above roughly 100 kHz. The 3 MHz gain-bandwidth product sets the small-signal -3 dB point; the two together define the usable frequency range for a given closed-loop gain.

Frequently asked questions

Is TL072ACDE4 obsolete?

The TL072ACDE4 is not yet obsolete but is in a Last Buy lifecycle stage. This means TI has announced the end of production for this specific suffix. Buyers should treat it as time-limited: order the required lifetime quantity now or qualify a current-production alternative before the last-time-buy window closes.

What is the closest pin-compatible alternative to TL072ACDE4?

Within the TL072 family, the TL072CDR is a pin-compatible 8-SOIC alternative with the same commercial temperature range and the same JFET-input architecture. The primary difference is packaging — the TL072ACDE4 ships in tube, while the TL072CDR ships in tape-and-reel. Confirm any minor parametric differences (offset voltage, bias current) against your circuit's requirements before substituting.