STMicroelectronics TL071ID, single JFET-input operational amplifier, 3 MHz gain-bandwidth product, 13V/µs slew rate, 65 pA input bias current, 1.4 mA supply current, 8-SOIC package, industrial temperature range -40°C to 85°C.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | J-FET |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 30 V |
| Current - supply | 1.4mA |
| Current - input bias | 65 pA |
| Operating temperature | -40°C~85°C |
| Gain bandwidth product | 3 MHz |
| Package | Tube |
| Slew rate | 13V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 1 |
The TL071ID is a single JFET-input operational amplifier from STMicroelectronics, part of the TL071 family.
For new designs, a current-production JFET op-amp from the same or a competing family should be evaluated.
The standard SOIC-8 land pattern fits most general-purpose analog PCB layouts; no special fan-out or thermal pad is required for this low-power op-amp. The part ships in Tube form.
For new designs, evaluate current-production single JFET op-amps from the TL071 family (such as the TL071CDT or TL071IDT, which may have different lifecycle status) or a comparable JFET-input op-amp from a competing manufacturer. For existing BOM lines, the TL071ID is available through independent distribution against an RFQ.
The TL071ID has a slew rate of 13V/µs. This is the typical large-signal rate at which the output voltage can change, limiting the maximum output swing without distortion at higher frequencies. For a 10 V peak-to-peak output, the full-power bandwidth is approximately 207 kHz (calculated as slew rate / (π × Vpp)).
The TL071ID is the surface-mount SOIC-8 variant of the single JFET op-amp, while the TL071CP is the through-hole DIP-8 version. Both share the same core JFET architecture, 3 MHz GBW, and 13V/µs slew rate. The TL072 is a dual-channel version of the same amplifier family, containing two independent JFET op-amps in one package. The choice between single (TL071) and dual (TL072) depends on channel count per board area.