Skip to main content
Log in
Texas Instruments TL071CPE4 — Analog & Data Acquisition

TL071CPE4 JFET Op-Amp, 13 V/µs Slew Rate, 8-DIP

MPNTL071CPE4
Active

Texas Instruments TL071CPE4, JFET-input operational amplifier, single channel, 3 MHz gain bandwidth, 13 V/µs slew rate, 1.4 mA supply current, 8-DIP through-hole package, 0°C to 70°C operating temperature.

Texas Instruments TL071CPE4 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL071CPE4 specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA
Current - input bias65 pA
Operating temperature0°C~70°C(TA)
Gain bandwidth product3 MHz
PackageBulk
Slew rate13V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits1

Product details

JFET-input op-amp in an 8-pin DIP

The 8-DIP through-hole package suits breadboard prototyping, through-hole PCB assembly, and field repairs of legacy equipment.

For audio-band applications (20 Hz–20 kHz) this is ample headroom — distortion from limited slew rate is negligible. For faster pulse or waveform generation, the 3 MHz gain-bandwidth product sets the small-signal bandwidth; the slew rate governs the large-signal edge rate, so a 10 V step settles in about 770 ns.

Commercial temperature grade — deployment scope

For industrial or automotive environments requiring -40°C to +85°C or wider, the TL071IP or TL071AI variants (same pinout, different temperature grade) would be the pick.

For dual-sourcing resilience, the TL071 family is second-sourced by multiple manufacturers with identical pinout and similar parametric performance — any JFET-input single op-amp in an 8-DIP with the same pin arrangement can be qualified as a drop-in alternative after verifying the offset and bias specs against the application's error budget.

Frequently asked questions

What is the replacement for TL071CPE4?

Buyers need to find a direct substitute if the part is unavailable or for second sourcing.

Is TL071CPE4 obsolete?

Determines if the part is still in production or if alternatives must be sought for long-term projects.

Where to buy TL071CPE4?

Directly leads to purchase; key conversion step for sourcing buyers.

What is the pinout of TL071CPE4?

Essential for design engineers to validate fit in their circuit layout.

What is the price of TL071CPE4?

Price comparison across distributors affects BOM costing decisions.

TL071CPE4 vs TL072: which is better?

Helps buyers decide on the best op-amp for their performance and cost needs.