Texas Instruments TL071CP, J-FET single op-amp, 3 MHz gain bandwidth, 13 V/µs slew rate, 65 pA input bias, 10 V to 30 V supply, 8-DIP through-hole package, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Amplifier type | J-FET |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 30 V |
| Current - supply | 1.4mA |
| Current - input bias | 65 pA |
| Operating temperature | 0°C~70°C |
| Gain bandwidth product | 3 MHz |
| Package | Tube |
| Slew rate | 13V/µs |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of circuits | 1 |
The TL071CP is a single-channel J-FET input operational amplifier from Texas Instruments. Its J-FET front end delivers a typical input bias current of 65 pA and a 3 MHz gain-bandwidth product.
Housed in an 8-pin DIP (0.300 inch, 7.62 mm pitch) through-hole package, the TL071CP is suited for breadboard prototyping, socketed designs, or legacy board retrofits.
No, the TL071CP is a single-channel (one circuit) op-amp. For a dual-channel J-FET op-amp in the same family, the TL072CP is the corresponding dual variant.
The TL071CP is a J-FET input op-amp with a 3 MHz GBW and 13 V/µs slew rate, while the LM741 is a general-purpose bipolar op-amp with a 1 MHz GBW and 0.5 V/µs slew rate. The TL071CP offers significantly higher speed and lower input bias current (65 pA vs typically 80 nA for the 741), but the pinout is the same standard 8-pin DIP. It is a functional upgrade in most circuits, though the compensation and bandwidth differences may require minor loop adjustments.
For a surface-mount, wider-temperature alternative, the TLV9351IDCKR provides a 10.6 MHz GBW, 25 V/µs slew rate, rail-to-rail output, and -40°C to 125°C range in a SOT-23 package. It is a CMOS general-purpose part, not a J-FET, so the input bias current and noise characteristics differ. For a closer J-FET sibling in the same TL07x family, the TL071IP offers the same electrical specs with an industrial temperature range (-40°C to 85°C) in the same 8-DIP package.