JFET op-amp for precision analog front-ends
For audio-band signals (20 Hz–20 kHz) this is generous headroom; the distortion floor stays low. The 3 MHz gain-bandwidth product sets the usable closed-loop bandwidth: at a gain of 10, expect a 300 kHz small-signal bandwidth.
Supply range and input offset — the BOM-fit check
A ±5 V to ±15 V dual rail is the typical deployment. Maximum input offset voltage is 3 mV — adequate for 8-bit to 10-bit signal chains without a trim pot, but if your ADC reference is 2.5 V and you need better than 0.1% accuracy, budget for offset calibration or select a lower-Vos grade. The 8-SOIC footprint is standard; the Tube shipping medium is what you get from surplus stock — no reel, no carrier tape.
Obsolete — sourcing reality and the replacement question
Texas Instruments no longer manufactures this specific commercial-temperature, 8-SOIC variant. For a pin-compatible functional replacement, the TL071 series includes the TL071ID (industrial temperature, -40°C to 125°C) and the TL071CP (PDIP package) — both may still be active, but verify current status before committing a BOM line. Expect to qualify date codes and test for authenticity if the batch is from broker stock.