Texas Instruments TL071BCDR, single J-FET operational amplifier, 3 MHz gain bandwidth product, 13 V/µs slew rate, 1.4 mA supply current, 8-SOIC package, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | J-FET |
| Voltage - input offset | 2 mV |
| Voltage - supply span | 30 V |
| Current - supply | 1.4mA |
| Current - input bias | 65 pA |
| Operating temperature | 0°C~70°C |
| Gain bandwidth product | 3 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 13V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 1 |
Slew rate is 13 V/µs — fast enough for audio line-level signals and moderate-speed ADC driver stages without excessive distortion. Supply current per amplifier is 1.4 mA, which keeps the power budget manageable in multi-channel boards. The 2 mV typical input offset voltage is adequate for non-precision DC-coupled paths.
Yes. The 3 MHz gain bandwidth product and 13 V/µs slew rate are adequate for line-level audio signal paths, and the J-FET input keeps noise low in high-impedance circuits. The commercial temperature range limits it to indoor or rack-mount audio gear.
The TL071 is a single op-amp; the TL072 is a dual op-amp in the same J-FET family. Both share the same 3 MHz GBW, 13 V/µs slew rate, and 65 pA input bias current. The choice is channel count per package — single vs dual.
Supply voltage range is 10 V to 30 V. The device is surface-mount in an 8-SOIC package.