The TL062CPWR: For a unity-gain buffer, the 1 MHz GBW sets the -3 dB closed-loop bandwidth at 1 MHz; at a gain of 10, the usable bandwidth drops to 100 kHz. This matters for high-impedance sensor front-ends — a 1 MΩ source resistor drops only 30 µV from bias current, negligible compared to the 3 mV typical input offset voltage.
Supply range and power budget for dual-channel operation
Each of the two amplifiers draws 200 µA of supply current, so the total quiescent draw for the dual package is 400 µA — low enough for battery-powered or loop-powered applications where every microamp counts.
Package and board-fit: 8-TSSOP on tape and reel
The 0.65 mm pitch is standard for TSSOP-8 — no exotic footprint required.
Temperature grade and operating envelope
This covers indoor equipment, bench instruments, and most consumer/industrial enclosures without active cooling. For extended industrial or automotive temperature ranges, look to the TL062B or TL064 family variants.