Skip to main content
Log in
Texas Instruments TL062CP — Analog & Data Acquisition

TL062CP JFET Op-Amp, 1 MHz, 3.5 V/µs, 8-DIP

MPNTL062CP
End of Life

Texas Instruments TL062CP, JFET-input dual operational amplifier, 1 MHz gain bandwidth, 3.5 V/µs slew rate, 200 µA supply per channel, 8-DIP through-hole package, 0°C to 70°C operating temperature.

$0.91Ref. price · indicative, final on quote
Texas Instruments TL062CP datasheet (PDF)
Packaging8-DIP (0.300", 7.62mm)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TL062CP specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply200µA (x2 Channels)
Current - input bias30 pA
Current - output (Channel)20 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product1 MHz
PackageTube
Slew rate3.5V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

The TL062CP is a JFET-input dual operational amplifier from Texas Instruments, in an 8-pin DIP through-hole package. It delivers a 1 MHz gain-bandwidth product and a 3.5 V/µs slew rate, drawing just 200 µA per channel from a supply span of 10 V to 30 V. This part is aimed at general-purpose analog signal conditioning — audio preamps, active filters, integrators, and sensor buffers — where low power and high input impedance matter more than speed.

The 20 mA output current per channel drives a following stage.

Frequently asked questions

Is TL062CP obsolete or active?

The TL062CP is Active per the manufacturer's product status. No end-of-life or last-time-buy has been announced. It remains available for new designs and spares.

What is the pinout of TL062CP?

The TL062CP uses the standard 8-pin DIP dual op-amp pinout: pin 1 is output A, pin 2 is inverting input A, pin 3 is non-inverting input A, pin 4 is VCC-, pin 5 is non-inverting input B, pin 6 is inverting input B, pin 7 is output B, pin 8 is VCC+. Pin 1 is identified by a notch and dot on the package.

TL062CP vs TL072 — which is better?

The TL072 is a faster JFET dual op-amp with a 3 MHz GBW and 13 V/µs slew rate, compared to the TL062CP's 1 MHz and 3.5 V/µs. The TL072 draws about 1.4 mA per channel versus 200 µA for the TL062CP. Choose the TL062CP for lower power consumption in battery-powered or loop-powered designs; choose the TL072 when you need more bandwidth or faster slew rate for audio or filter applications. Both share the same 8-DIP pinout, so they are socket-swappable.