Skip to main content
Texas Instruments TL054AID — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TL054AID JFET Op-Amp, 2.7 MHz, 17.8 V/µs, 14-SOIC

MPNTL054AID
End of Life

Texas Instruments TL054AID, LinCMOS™ series, quad JFET op-amp, 2.7 MHz gain bandwidth, 17.8 V/µs slew rate, 8.4 mA supply, 30 pA input bias, 14-SOIC, -40°C to 85°C.

$9.18Ref. price · indicative, final on quote
TL054AID datasheet
Packaging14-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TL054AID Technical Specifications
ParameterValue
SeriesLinCMOS™
Mounting typeSurface Mount
Amplifier typeJ-FET
Voltage - input offset500 µV
Voltage - supply span30 V
Current - supply8.4mA (x4 Channels)
Current - input bias30 pA
Current - output (Channel)80 mA
Operating temperature-40°C ~ 85°C (TA)
Gain bandwidth product2.7 MHz
PackageTube
Slew rate17.8V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad JFET op-amp for signal conditioning and industrial front-ends

The Texas Instruments TL054AID is a quad-channel JFET-input operational amplifier built on the LinCMOS™ process. It delivers a 2.7 MHz gain-bandwidth product and a 17.8 V/µs slew rate, with a supply current of 8.4 mA across all four amplifiers. The JFET input stage keeps input bias current at 30 pA, making it a natural fit for high-impedance sensor interfaces, photodiode amplifiers, and multi-channel data-acquisition front-ends. The 14-SOIC package and industrial temperature range (-40°C to 85°C) suit it for factory automation, outdoor telecom, and motor-drive signal chains where board space is tight and ambient heat is a given.

Active production, no obsolescence concern

The TL054AID carries an Active lifecycle status from Texas Instruments. No last-time-buy notices are on record. ROHS3 compliant. For a BOM line that needs a quad JFET op-amp in SOIC-14, this part is a safe selection for both new builds and ongoing production replenishment.

Frequently asked questions

What is the TL054AID pinout?

The TL054AID uses the standard quad op-amp pinout for a 14-SOIC package: output 1 on pin 1, inverting input 1 on pin 2, non-inverting input 1 on pin 3, V+ on pin 4, non-inverting input 2 on pin 5, inverting input 2 on pin 6, output 2 on pin 7, output 3 on pin 8, inverting input 3 on pin 9, non-inverting input 3 on pin 10, V- on pin 11, non-inverting input 4 on pin 12, inverting input 4 on pin 13, output 4 on pin 14.

TL054AID vs TL074: which is better?

The TL074 is a classic JFET quad op-amp with a 3 MHz GBW and 13 V/µs slew rate, but it draws about 1.4 mA per channel (5.6 mA total) and has a typical input bias current of 65 pA. The TL054AID offers a higher slew rate (17.8 V/µs), lower supply current per channel (2.1 mA), and a lower input bias current (30 pA). For precision low-bias applications, the TL054AID is the cleaner choice.

What is the TL054AID equivalent?

There is no direct pin-compatible second source listed. For a single-channel alternative with similar JFET input characteristics, the OPA859QDSGRQ1 offers 900 MHz GBW and 1150 V/µs slew rate but is automotive-grade and single-channel only — a different class of part.