Skip to main content
Texas Instruments TL054ACN — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TL054ACN Quad JFET Op-Amp, 17.8 V/µs Slew Rate, 14-DIP

MPNTL054ACN
End of Life

Texas Instruments TL054ACN, LinCMOS™ series, quad JFET operational amplifier, 2.7 MHz gain bandwidth, 17.8 V/µs slew rate, 8.4 mA supply per quad, 14-DIP (0.300", 7.62 mm) through-hole package, 0°C to 70°C operating temperature.

$8.84Ref. price · indicative, final on quote
TL054ACN datasheet
Packaging14-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TL054ACN Technical Specifications
ParameterValue
SeriesLinCMOS™
Mounting typeThrough Hole
Amplifier typeJ-FET
Voltage - input offset500 µV
Voltage - supply span30 V
Current - supply8.4mA (x4 Channels)
Current - input bias30 pA
Current - output (Channel)80 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product2.7 MHz
PackageTube
Slew rate17.8V/µs
Case14-DIP (0.300\", 7.62mm)
Number of circuits4

Product details

The Texas Instruments TL054ACN is a quad JFET-input operational amplifier from the LinCMOS™ series, packaged in a 14-pin DIP (0.300" body width) for through-hole mounting. It delivers a gain bandwidth product of 2.7 MHz and a slew rate of 17.8 V/µs, with each of the four channels capable of sourcing or sinking 80 mA. Supply span runs from 10 V to 30 V single or dual supply. The 30 pA input bias current and 500 µV input offset voltage suit it for precision signal conditioning in instrumentation and control loops where FET-input impedance matters.

Temperature grade and deployment scope

Rated for 0°C to 70°C ambient, this is a commercial-temperature part. The through-hole DIP package fits socketed prototype boards or legacy PCB layouts that haven't migrated to surface-mount.

Lifecycle and sourcing reality

Status is Active per the manufacturer, with ROHS3 compliance. No PCN or last-time-buy notice is in effect — this part is still in regular production. Sourcing is through independent distribution; availability and pricing are confirmed at quote time.

Frequently asked questions

What is the TL054ACN pinout?

The TL054ACN uses a standard 14-pin DIP (0.300" width, 7.62 mm pitch) with the JEDEC pinout for quad op-amps: outputs on pins 1, 7, 8, and 14; inverting and non-inverting inputs on the adjacent pins per channel. The 14-PDIP supplier device package matches the 14-DIP case code.

Is TL054ACN suitable for audio applications?

The 2.7 MHz GBW and 17.8 V/µs slew rate provide enough bandwidth for line-level audio. The 500 µV input offset and 30 pA bias are adequate for most preamp stages. However, the commercial temperature grade and lack of a low-noise spec in the record mean it is not optimized for high-fidelity or low-noise audio paths — it is a general-purpose JFET op-amp, not an audio-specific device.