Skip to main content
Log in
Texas Instruments TL054ACD — Analog & Data Acquisition

TL054ACD Quad JFET Op Amp, 2.7 MHz, 17.8 V/µs, 14-SOIC

MPNTL054ACD
End of Life

Texas Instruments TL054ACD, LinCMOS™ series, quad JFET op amp in 14-SOIC. 2.7 MHz gain bandwidth, 17.8 V/µs slew rate, 8.4 mA supply (four channels), 500 µV input offset, 30 pA bias current, 80 mA output per channel, 10 V to 30 V supply span, 0°C to 70°C.

$8.47Ref. price · indicative, final on quote
Texas Instruments TL054ACD datasheet (PDF)
Packaging14-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
SeriesLinCMOS™
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TL054ACD specifications
ParameterValue
SeriesLinCMOS™
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset500 µV
Voltage - supply span30 V
Current - supply8.4mA (x4 Channels)
Current - input bias30 pA
Current - output (Channel)80 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product2.7 MHz
PackageTube
Slew rate17.8V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad JFET op amp for signal conditioning in controlled environments

The TL054ACD is a quad JFET-input operational amplifier from TI's LinCMOS™ series, packaged in a 14-SOIC. It delivers a gain bandwidth product of 2.7 MHz and a slew rate of 17.8 V/µs, drawing 8.4 mA total supply current across all four channels. With an input bias current of 30 pA and input offset voltage of 500 µV, it suits precision analog signal conditioning — active filters, buffer stages, and data-acquisition front-ends — where high input impedance and low drift matter.

Slew rate and bandwidth — what they mean for signal fidelity

The 17.8 V/µs slew rate determines how fast the output can swing under a large-signal step. The 2.7 MHz gain bandwidth product governs small-signal response.

Supply current and output drive — power budget and load

The four amplifiers draw 8.4 mA total supply current. The output can source or sink 80 mA per channel.

Frequently asked questions

Can TL054ACD be used as a replacement for TL074?

The TL054ACD is a pin-compatible quad JFET op amp in the same 14-SOIC package as the TL074, but it has a lower gain bandwidth (2.7 MHz vs 3 MHz typical for TL074) and a higher slew rate (17.8 V/µs vs 13 V/µs). Verify the specific performance requirements of your circuit before substituting.

What is the pinout of TL054ACD?

The TL054ACD uses the standard quad op amp pinout for a 14-SOIC package: output 1 (pin 1), inverting input 1 (pin 2), non-inverting input 1 (pin 3), V+ (pin 4), non-inverting input 2 (pin 5), inverting input 2 (pin 6), output 2 (pin 7), output 3 (pin 8), inverting input 3 (pin 9), non-inverting input 3 (pin 10), V- (pin 11), non-inverting input 4 (pin 12), inverting input 4 (pin 13), output 4 (pin 14).