Texas Instruments LinCMOS™ TL052AIP, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 20.7 V/µs slew rate, 30 pA input bias, ±5 V to ±15 V supply, 8-DIP through-hole package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Series | LinCMOS™ |
| Mounting type | Through Hole |
| Amplifier type | J-FET |
| Voltage - input offset | 650 µV |
| Voltage - supply span | 30 V |
| Current - supply | 4.8mA (x2 Channels) |
| Current - input bias | 30 pA |
| Current - output (Channel) | 80 mA |
| Operating temperature | -40°C ~ 85°C (TA) |
| Gain bandwidth product | 3 MHz |
| Package | Tube |
| Slew rate | 20.7V/µs |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of circuits | 2 |
It delivers a 3 MHz gain-bandwidth product and a 20.7 V/µs slew rate, with an input bias current of just 30 pA.
The supply span covers 10 V to 30 V total, so you can run it from split ±5 V rails or a single 12 V or 24 V industrial bus — no extra regulator needed.
For a through-hole JFET op-amp that has been around for years, that active status is the green light to keep it on the BOM without sourcing anxiety.
A surface-mount functional alternative is the TLV9362IDDFR, a dual general-purpose op-amp with 10.6 MHz GBW, 25 V/µs slew rate, and rail-to-rail output. It is not pin-compatible (different package), but it fills a similar signal-conditioning role in a smaller footprint.