Texas Instruments THS4032CD, dual voltage-feedback operational amplifier, 120 MHz gain bandwidth, 100 V/µs slew rate, 9 V to 32 V supply, 8-SOIC package, 0°C to 70°C, tube.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | Voltage Feedback |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 32 V |
| Current - supply | 8.5mA (x2 Channels) |
| Current - input bias | 3 µA |
| Current - output (Channel) | 90 mA |
| Operating temperature | 0°C ~ 70°C |
| -3db bandwidth | 100 MHz |
| Gain bandwidth product | 120 MHz |
| Package | Tube |
| Slew rate | 100V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
It operates from a single or split supply spanning 9 V to 32 V, drawing 8.5 mA per channel. The 100 MHz -3 dB bandwidth and 90 mA output current per channel suit it for ADC drivers, video buffers, and high-speed active filters.
The 120 MHz gain bandwidth product sets the small-signal gain ceiling. The 100 V/µs slew rate supports full-power output swings without slew-induced distortion.
The gain bandwidth product is 120 MHz.
Yes, the 9 V to 32 V total supply span allows split supplies such as ±5 V or ±15 V, as long as the total differential stays within that range.
There is no official direct replacement from TI. For a higher-speed single-channel alternative, the THS4215DRBT (350 MHz, 970 V/µs) is a voltage-feedback op-amp but requires a different package and 5 V supply. For a general-purpose dual op-amp with rail-to-rail output, the TLV9362IDDFR (10.6 MHz, 25 V/µs) is an option but at a lower speed tier.