CAN FD transceiver for 5 Mbps bus traffic
The 120 mV receiver hysteresis cleans up noise on long bus runs, reducing bit-error rate in electrically harsh environments like motor drives or HV battery packs.
Package and board fit — 8-VSON with wettable flank
Housed in an 8-VSON (3x3) package with an exposed thermal pad and wettable flank terminals, this transceiver suits automated optical inspection (AOI) after reflow. The 3x3 mm footprint is compact enough for space-constrained ECU modules while the exposed pad provides a low-thermal-resistance path to the PCB ground plane for heat sinking. Surface-mount with wettable flank means the side of the package terminal is solderable — a feature that helps verify solder-joint quality on bottom-terminated packages during X-ray or AOI inspection.
For production BOMs that need a CAN FD transceiver with AEC-Q100 grade and 5 Mbps capability, this part is a current-design-in candidate — no last-time-buy clock to manage.