SN75LVDS31D

Texas Instruments

Texas Instruments SN75LVDS31D LVDS driver, 4/0 channels, 155 Mbps data rate, 3 V ~ 3.6 V supply, 16-SOIC (0.154", 3.90 mm Width), surface mount, tube.

Texas Instruments SN75LVDS31D
Download datasheet (PDF)
[IN STOCK] Spot Stock · 24-48h Dispatch
$4.23/ pc

Volume pricing

Buy Now

MOQ 1 · Tube · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

SN75LVDS31D specifications
Parameter / AttributeSpecification / Value
TypeDriver
MountingSurface Mount
Supply voltage3V ~ 3.6V
ProtocolLVDS
Operating temperature0°C~70°C
PackageTube
Data rate155Mbps
Case16-SOIC (0.154\", 3.90mm Width)
Number of drivers (Receivers)4/0

Technical details

LVDS driver for 155 Mbps point-to-point links

The SN75LVDS31D is a quad LVDS driver from Texas Instruments, delivering four differential output channels in a single 16-SOIC package. It converts parallel TTL/CMOS signals into LVDS levels at data rates up to 155 Mbps per channel, making it a fit for high-speed serial backplanes, clock distribution, and camera-link interfaces where the common-mode range and low swing of LVDS reduce EMI and power dissipation compared to single-ended signalling.

Four outputs, one package — routing and termination

With four drivers on die, the SN75LVDS31D handles a 4-lane LVDS link in a single IC. Each output pair delivers a differential swing of 250 mV to 450 mV into a 100 Ω termination resistor at the receiver end — the standard LVDS load. The 155 Mbps per-channel ceiling means the driver can sustain a 77.5 MHz clock or a 155 Mbps data stream on each lane before the output rise/fall time degrades the eye opening. The supply decoupling should sit within 5 mm of the VCC and GND pins — a 0.1 µF ceramic per supply pair, plus a 10 µF bulk cap near the package, keeps the switching noise below the 50 mV peak-to-peak the LVDS output jitter budget expects.

SN75LVDS31D
[ALLOC] verified
Quote