Skip to main content
Log in
Texas Instruments SN75176BPSR — Interface & Transceivers

SN75176BPSR RS-485/RS-422 Transceiver, Half-Duplex, 8-SOIC

MPNSN75176BPSR
Active

Texas Instruments SN75176BPSR, RS-422/RS-485 transceiver, half-duplex, 1/1 driver/receiver, 4.75V to 5.25V supply, 50 mV hysteresis, 0°C to 70°C, 8-SOIC.

$1.4100Ref. price · indicative, final on quote
Texas Instruments SN75176BPSR datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN75176BPSR specifications
ParameterValue
TypeTransceiver
MountingSurface Mount
Supply voltage4.75V ~ 5.25V
ProtocolRS422, RS485
Operating temperature0°C~70°C
DuplexHalf
PackageTape & Reel (TR); Cut Tape (CT)
Case8-SOIC (0.209\", 5.30mm Width)
Receiver hysteresis50 mV
Number of drivers (Receivers)1/1

Product details

RS-485 bus interface in a standard 8-SOIC footprint

Supply rail and temperature — fit for the BOM

The 5V nominal supply (4.75V min, 5.25V max) ties this part to legacy 5V logic rails or a regulated 5V bus. If your design runs on 3.3V I/O, this transceiver needs a level translator or a separate 5V supply. For those applications, look at the industrial-temperature variants in the SN75176 family.

For new designs, it remains a valid choice, and for existing BOMs, there is no imminent obsolescence risk to trigger a requalification cycle.

Frequently asked questions

What is the difference between SN75176BPSR and SN75176BDR?

Both are the same base SN75176 half-duplex RS-485 transceiver. The difference is in the packaging and reel format: the BPSR suffix indicates a different tape-and-reel specification compared to the BDR suffix. Electrically and functionally they are identical. The choice between them depends on your assembly house's preferred reel packaging or your inventory system's part-number convention.