Texas Instruments 74LVTH series, SN74LVTH125DBR, Buffer, Non-Inverting, 3-State, 2.7V ~ 3.6V supply, 4 elements, 1 bit per element, 32mA/64mA output, -40°C ~ 85°C, 14-SSOP package.
| Parameter | Value |
|---|---|
| Series | 74LVTH |
| Logic type | Buffer, Non-Inverting |
| Output type | 3-State |
| Mounting | Surface Mount |
| Supply voltage | 2.7V ~ 3.6V |
| Current - output high, low | 32mA, 64mA |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | 14-SSOP (0.209\", 5.30mm Width) |
| Number of elements | 4 |
| Number of bits per element | 1 |
Each of the four elements handles one bit, and the outputs go high-impedance when the corresponding output-enable pin is deasserted — a standard architecture for shared bus isolation.
The part sources 32 mA and sinks 64 mA per output, which gives enough headroom to drive a typical 3.3 V logic input with fan-out to several loads without re-drive.
TI lists the SN74LVTH125DBR as an active product with ROHS3 compliance.
Design engineers need to confirm voltage compatibility with the rest of the logic circuit.
Buyers and brokers need lifecycle status for long-term availability and risk assessment.
Sourcing buyers need current distributor inventory to fill BOM lines quickly.
When the part is out of stock or EOL, engineers and buyers need drop-in replacements.
Maintenance techs and designers need physical compatibility for PCB layout and replacement.
Purchasing agents require quick cost and availability data for procurement decisions.