Skip to main content
Texas Instruments SN74LVCH244APWR — Memory (DRAM / SRAM / Flash / EEPROM)

SN74LVCH244APWR Buffer, Non-Inverting, 3-State, 20-TSSOP

MPNSN74LVCH244APWR
End of Life

Texas Instruments 74LVCH series, Buffer Non-Inverting, 3-State, 20-TSSOP, 1.65V to 3.6V supply, 24mA output, -40°C to 85°C, SN74LVCH244APWR.

$0.61Ref. price · indicative, final on quote
Packaging20-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Series74LVCH
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN74LVCH244APWR specifications
ParameterValue
Series74LVCH
Logic typeBuffer, Non-Inverting
Output type3-State
MountingSurface Mount
Supply voltage1.65V ~ 3.6V
Current - output high, low24mA, 24mA
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
Case20-TSSOP (0.173\", 4.40mm Width)
Number of elements2
Number of bits per element4

Product details

20-TSSOP footprint and rework story

The SN74LVCH244APWR: Pin 1 is marked by a molded dot and a beveled corner on the top face; the orientation is unambiguous under a stereo microscope at 10×, so you won't flip it on reflow.

The 24 mA symmetric drive (both high and low) is enough to fan out to four 74LVC loads or drive a short backplane trace up to 50 pF at 100 MHz. The 3-state output lets multiple buffers share a data bus; the OE pin pulls the outputs into high-Z, so the bus floats cleanly when the buffer is deselected.

The 74LVCH series is a mature, high-volume logic family; second-source equivalents from Nexperia and ON Semiconductor exist but are not pin-for-pin drop-ins without verifying the BOM position.

Frequently asked questions

Will SN74LVCH244APWR drop into a board designed for SN74LVTH16245ADGVR without rewiring?

No — the SN74LVTH16245ADGVR is a 48-pin TSSOP transceiver with 8-bit per element and a 2.7 V minimum supply, while the SN74LVCH244APWR is a 20-pin TSSOP buffer with 4-bit per element and a 1.65 V minimum supply. The pinout and footprint are completely different; a board spin is required.