8-bit D-type with master reset
The SN74HC273NSR is an 8-bit D-type flip-flop from the 74HC family, clocked on the positive edge with a master reset that clears all outputs asynchronously. It runs on a 2 V to 6 V supply rail and delivers 5.2 mA source/sink per output — enough to drive standard logic inputs or low-current LEDs directly. Housed in a 20-SOIC package (0.209-inch body width), it is a surface-mount part that fits the standard 20-SO footprint. The 60 MHz clock ceiling and 27 ns propagation delay at 6 V, 50 pF load place it in the mid-speed band of the 74HC logic family — fast enough for most control and data-latch tasks in industrial or consumer boards.
Active lifecycle and compliance
The operating temperature range of -40°C to 85°C covers commercial and most industrial environments. Quiescent current is just 8 µA, making it suitable for power-sensitive applications where the flip-flop sits idle between clock events.
Sourcing and availability
Sourced through independent distribution channels, the SN74HC273NSR is quoted to order against your BOM quantity. Availability and current pricing are confirmed at RFQ time — no stock-holding claim is made here. For volume procurement or design-in support, the part is supplied in Tape & Reel or Cut Tape options. The 20-SOIC package is a common footprint shared across many 74HC and 74HCT devices, easing second-sourcing if needed.