Texas Instruments 74F series, Buffer, Non-Inverting, 3-State, 4.5V ~ 5.5V supply, 4 elements, 1 bit per element, 15mA/64mA output, 0°C ~ 70°C, Through Hole, 14-DIP, 14-PDIP.
| Parameter | Value |
|---|---|
| Series | 74F |
| Logic type | Buffer, Non-Inverting |
| Output type | 3-State |
| Mounting | Through Hole |
| Supply voltage | 4.5V ~ 5.5V |
| Current - output high, low | 15mA, 64mA |
| Operating temperature | 0°C ~ 70°C (TA) |
| Package | Tube |
| Case | 14-DIP (0.300\", 7.62mm) |
| Number of elements | 4 |
| Number of bits per element | 1 |
The SN74F125N: Each of the four buffers sinks 64 mA and sources 15 mA. The 3-state output enables per-bit bus control.
Housed in a 14-pin DIP (0.300" body, 7.62 mm pitch), this part is through-hole only — no surface-mount variant in this order code.
TI lists the SN74F125N as an active product.
Yes, each buffer can sink 64 mA (low-level output current) and source 15 mA (high-level).