Skip to main content
Texas Instruments SN74CBT16214DGGR — Crystals & Oscillators

SN74CBT16214DGGR Mux/Demux 12x1:3 56-TSSOP - TI 74CBT

MPNSN74CBT16214DGGR
End of Life

Texas Instruments 74CBT series, SN74CBT16214DGGR — 12 x 1:3 multiplexer/demultiplexer, single 4.5V–5.5V supply, 56-TFSOP (0.240", 6.10mm width), -40°C to 85°C, active production.

$2.96Ref. price · indicative, final on quote
Packaging56-TFSOP (0.240", 6.10mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

SN74CBT16214DGGR Technical Specifications
ParameterValue
TypeMultiplexer/Demultiplexer
Series74CBT
Mounting typeSurface Mount
Voltage4.5V ~ 5.5V
Voltage supply sourceSingle Supply
Current - output high, low15mA, 64mA
Operating temperature-40°C ~ 85°C
Circuit12 x 1:3
PackageTape & Reel (TR); Cut Tape (CT)
Case56-TFSOP (0.240\", 6.10mm Width)
Independent circuits1

Product details

Switch matrix: 12 channels, three-way routing

The SN74CBT16214DGGR is a 12 x 1:3 multiplexer/demultiplexer from the 74CBT family — twelve independent signal paths, each selectable to one of three outputs or inputs. That is 36 switch elements in a single 56-pin TFSOP package, controlled by a common select bus. Supply range is 4.5V to 5.5V from a single rail, making it a direct drop-in for 5V TTL/CMOS logic environments.

Output drive and signal integrity

High and low output current ratings are 15 mA (source) and 64 mA (sink) — the sink capability is more than four times the source, which matters when the switch is driving a bus with asymmetric loading like a fan-out buffer or a memory address line. The 64 mA sink allows the switch to hold a logic low against a strong pull-up without the output creeping above VIL. Because the part is a pass-gate mux (no latching or registered outputs), propagation delay is negligible — the switch is essentially a set of NMOS/CMOS transmission gates. The buyer should confirm that the channel resistance (not listed here) stays low enough for the edge rates in their specific bus; typical 74CBT Ron is in the 5–10 Ω range.

Active production — no obsolescence risk

Lifecycle status is Active, so this is not a NRND or EOL part. No last-time-buy window to chase. ROHS3 compliant — no exemption-based restrictions for EU or California markets. The 56-TFSOP package is lead-free compatible with standard reflow profiles.

Package and PCB integration

Housed in a 56-TFSOP (0.240", 6.10 mm width) — a fine-pitch TSSOP derivative. The 0.50 mm ball pitch demands careful PCB fan-out: a 4-layer board with microvias or blind vias is typical for routing all 56 signals out from under the package body. The supplier device package is listed as 56-TSSOP, confirming the footprint matches standard TSSOP-56 land patterns. Surface-mount only; no through-hole variant exists. The tape-and-reel option is the standard delivery format for pick-and-place assembly; cut tape is also available for prototyping or low-volume builds.

Frequently asked questions

What is the function of the SN74CBT16214DGGR?

It is a 12 x 1:3 multiplexer/demultiplexer. Twelve independent signal channels, each switchable to one of three destinations. The select lines are common across all channels.