Dual buffer for low-voltage signal chains
The SN74AUP2G34DCKR: It operates across a supply range of 0.8V to 3.6V, making it suitable for battery-powered and low-voltage logic interfaces where the rail may drop below 1V. Each buffer can source or sink 4mA of output current, enough to drive a light load on a short PCB trace or feed the input of a downstream CMOS gate.
Supply voltage and drive capability
The 0.8V minimum supply voltage is the key differentiator from older 1.65V-minimum families — this part works directly from a single-cell battery near end-of-life or from a 1.0V core rail without a level translator.
Package and board-fit
Housed in a 6-pin SC-70-6 (SOT-363) package, the part occupies 2.0mm × 2.1mm of board area — a footprint that fits into dense mixed-signal layouts where space is at a premium.
The part is RoHS3 compliant, meeting the latest EU restriction directive without exemptions.