Skip to main content
Texas Instruments SN74ALS00AN — Discrete Semiconductors
Texas Instruments

SN74ALS00AN NAND Gate IC, 74ALS, 14-DIP, 11ns @ 5V

MPNSN74ALS00AN
End of Life

Texas Instruments 74ALS series, NAND Gate, 4 Circuit, 2-Input, Through Hole, 14-DIP (0.300", 7.62mm), 4.5V ~ 5.5V supply, 0°C ~ 70°C operating temperature.

$1.09Ref. price · indicative, final on quote
SN74ALS00AN datasheet
Packaging14-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

SN74ALS00AN Technical Specifications
ParameterValue
Series74ALS
Logic typeNAND Gate
Mounting typeThrough Hole
Voltage4.5V ~ 5.5V
Current - output high, low400µA, 8mA
Number of inputs2
Operating temperature0°C ~ 70°C
PackageTube
Case14-DIP (0.300\", 7.62mm)
Number of circuits4
Input logic level - low0.8V
Input logic level - high2V
Max propagation delay @ v, max CL11ns @ 5V, 50pF

Product details

What the SN74ALS00AN is and where it fits

The Texas Instruments SN74ALS00AN is a quad 2-input NAND gate from the 74ALS family, packed in a 14-pin DIP for through-hole mounting. It takes a 4.5V to 5.5V supply and switches at 11 ns typical into a 50 pF load at 5V — fast enough for most 5V TTL bus and glue logic without worrying about signal-integrity headaches. The four independent gates each sink 8 mA or source 400 µA, which covers standard fan-out to a handful of LS or ALS loads. Temperature range is 0°C to 70°C, so it is a commercial-grade part for indoor equipment — office peripherals, test gear, industrial controllers that live in a conditioned panel.

Package and mounting — field-service friendly

14-DIP, 0.300 inch body width, 7.62 mm pitch — standard socketable footprint. No special tools needed: a manual IC extractor and a DIP socket let you swap this in the field without a hot-air station. If you are stocking a field kit, this is one of those parts that fits a wide range of legacy 5V logic boards.

Frequently asked questions

Is SN74ALS00AN RoHS compliant?

Yes, it is ROHS3 compliant.

SN74ALS00AN vs SN74LS00AN differences?

The ALS00 is faster (11 ns vs ~15 ns for the LS00 at 5V, 50 pF) and draws less supply current per gate. Both are 5V TTL-compatible, same pinout, same 14-DIP package. If your board already has ALS parts, stick with ALS for consistent timing; if it is all LS, the ALS00 drops in as a speed upgrade.

What are the alternatives to SN74ALS00AN?

For a through-hole 5V NAND gate, the SN74LS00AN is the slower, lower-power sibling. If you need surface-mount, the SN74ALS38BNSR offers open-collector outputs in an SO package. For a wider supply range (2V to 6V) and lower power, the SN74HC20N provides dual 4-input NAND in a 14-DIP, but the pinout differs.