Texas Instruments 74AC series SN74AC241DWR, Buffer, Non-Inverting, 3-State output, 2V to 6V supply, 24mA output current, 20-SOIC package, -40°C to 85°C operating temperature.
| Parameter | Value |
|---|---|
| Series | 74AC |
| Logic type | Buffer, Non-Inverting |
| Output type | 3-State |
| Mounting | Surface Mount |
| Supply voltage | 2V ~ 6V |
| Current - output high, low | 24mA, 24mA |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | 20-SOIC (0.295\", 7.50mm Width) |
| Number of elements | 2 |
| Number of bits per element | 4 |
The SN74AC241DWR is a 74AC-series non-inverting buffer from Texas Instruments, organized as two 4-bit elements with independent output-enable controls. The 3-state outputs let multiple buffers share a common bus — the high-impedance state disconnects the output when the element is not selected, eliminating bus contention on multiplexed address or data lines.
Yes — the DWR suffix indicates Tape & Reel packaging; the DW suffix is tube. Both share the same 20-SOIC wide-body footprint, logic function, and electrical ratings. The DWR is the reeled version for automated pick-and-place assembly.
The PW variant uses a TSSOP-20 package (4.4 mm body width) instead of the 20-SOIC wide body (7.50 mm). The PW is smaller and suited for space-constrained boards, but the pinout and electrical specifications are identical.