Texas Instruments 65LVDS series LVDS Receiver, 400Mbps, 0/4 Drivers/Receivers, 3V~3.6V Supply, -40°C~85°C, Surface Mount, 16-TSSOP.
| Parameter | Value |
|---|---|
| Type | Receiver |
| Series | 65LVDS |
| Mounting | Surface Mount |
| Supply voltage | 3V ~ 3.6V |
| Protocol | LVDS |
| Operating temperature | -40°C~85°C |
| Package | Tape & Reel (TR) |
| Data rate | 400Mbps |
| Case | 16-TSSOP (0.173\", 4.40mm Width) |
| Receiver hysteresis | 50 mV |
| Number of drivers (Receivers) | 0/4 |
The SN65LVDS32PWRG4 is a 65LVDS series receiver for point-to-point or multidrop links. Each of the four receiver channels handles data rates up to 400 Mbps, with a built-in 50 mV hysteresis that rejects noise on the differential lines — useful when the cable runs across a noisy factory floor or through a backplane.
That removes the urgency to find a last-time buy or a drop-in substitute for new designs.
The SN65LVDS32PWRG4 is the tape-and-reel variant of the base SN65LVDS32PWR. The 'G4' suffix historically indicated a green/RoHS-compliant finish. Electrically and functionally they are the same device, so the PWRG4 can directly replace the PWR in a 3.3 V LVDS receiver application.
Yes.
Yes, like all standard LVDS receivers, the SN65LVDS32 expects a 100 Ω termination resistor across the differential input pair at the receiver end. This resistor is external — it is not integrated into the device.