Skip to main content
Texas Instruments SN65LVDS315RGER — Interface & Transceivers

TI SN65LVDS315RGER LVDS Serializer, 201 Mbps, 24-VFQFN

MPNSN65LVDS315RGER
Active

Texas Instruments SN65LVDS315RGER LVDS serializer, 8-input CMOS to 1-output LVDS, 201 Mbps data rate, 1.65V-1.95V supply, -40°C to 85°C, 24-VFQFN exposed pad package.

$2.6925Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN65LVDS315RGER specifications
ParameterValue
Input typeCMOS
Output typeLVDS
MountingSurface Mount
Supply voltage1.65V ~ 1.95V
I/O channels8
Operating temperature-40°C~85°C(TA)
PackageTape & Reel (TR); Cut Tape (CT)
FunctionSerializer
Data rate201Mbps
Case24-VFQFN Exposed Pad

Product details

201 Mbps CMOS-to-LVDS serializer for display and camera links

The Texas Instruments SN65LVDS315RGER is an 8-input, 1-output LVDS serializer that converts parallel CMOS data into a serial LVDS stream at rates up to 201 Mbps. It accepts eight CMOS-level inputs and multiplexes them onto a single LVDS differential pair, reducing the number of interconnect lines between a host processor and a remote display or image sensor by a factor of eight.

Supply rail and logic-level compatibility

The 1.65V to 1.95V supply range directly answers the compatibility question: yes, the SN65LVDS315RGER runs on a 1.8V rail without a separate level shifter. The CMOS inputs are referenced to the same supply, so the host interface must also swing at 1.8V logic levels. The LVDS output delivers a typical 350 mV swing across a 100 Ω termination, compliant with the TIA/EIA-644 standard.

Package, footprint, and thermal management

The device comes in a 24-VFQFN with exposed pad, measuring 4 mm x 4 mm (supplier device package 24-VQFN).

This is a standard catalog part available through TI-authorized distribution and the independent channel. For BOM planning, there is no last-time-buy risk to model for the next several years.

Frequently asked questions

What is the data rate of SN65LVDS315RGER?

The SN65LVDS315RGER supports a serial data rate of 201 Mbps, which corresponds to a parallel input clock of approximately 25 MHz when all eight inputs are active.

What supply voltage does SN65LVDS315RGER use?

The device operates from a 1.65V to 1.95V supply, making it compatible with 1.8V logic systems without additional level shifting.

Does SN65LVDS315RGER require external termination resistors?

Yes, the LVDS output requires a 100 Ω termination resistor placed as close as possible to the receiver input to match the differential impedance and maintain signal integrity at 201 Mbps.