Skip to main content
Texas Instruments SN65LVDS2DBVRG4 — Interface & Transceivers

SN65LVDS2DBVRG4 LVDS Receiver, 400 Mbps, SOT-23-5

MPNSN65LVDS2DBVRG4
End of Life

Texas Instruments 65LVDS series SN65LVDS2DBVRG4 single LVDS receiver, 400 Mbps data rate, 2.4V-3.6V supply, SOT-23-5 package, -40°C to 85°C operating temperature.

$1.8000Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN65LVDS2DBVRG4 specifications
ParameterValue
TypeReceiver
Series65LVDS
MountingSurface Mount
Supply voltage2.4V ~ 3.6V
ProtocolLVDS
Operating temperature-40°C~85°C
PackageTape & Reel (TR); Cut Tape (CT)
Data rate400Mbps
CaseSC-74A, SOT-753
Number of drivers (Receivers)0/1

Product details

Supply rail and 5V compatibility

The supply range is 2.4V to 3.6V, so this part is not intended for direct 5V operation. If your system has a 5V rail, you will need a 3.3V regulator to power the receiver. The LVDS input common-mode range is specified relative to the supply, so staying within the rated VCC window is essential for proper signal detection.

Housed in a 5-pin SOT-23 (SC-74A) package, the SN65LVDS2DBVRG4 occupies minimal board area. The SOT-23-5 footprint is a standard layout shared with many logic and interface ICs, so PCB layout is straightforward. The device is surface-mount only.

Frequently asked questions

What is the typical data rate of SN65LVDS2DBVRG4?

The receiver supports data rates up to 400 Mbps, which is the specified maximum.

Can SN65LVDS2DBVRG4 be used with 5V supply?

No. The supply voltage range is 2.4V to 3.6V. A 5V supply exceeds the absolute maximum rating and will damage the device.

SN65LVDS2DBVRG4 vs SN65LVDS2DBVRE4 what's the difference?

Both are the same base device (65LVDS2). The suffix difference is packaging and reel quantity: DBVRG4 is Tape & Reel, while DBVRE4 is typically a different reel size or packing option. Electrical specs are identical.