Skip to main content
Texas Instruments SN65LVDS179DGKR — Interface & Transceivers

SN65LVDS179DGKR LVDS Transceiver, 150 Mbps, Full Duplex

MPNSN65LVDS179DGKR
Active

Texas Instruments SN65LVDS179DGKR LVDS transceiver, full duplex 1/1, 150 Mbps data rate, 3V to 3.6V supply, -40°C to 85°C, 8-VSSOP, Tape & Reel.

$4.0500Ref. price · indicative, final on quote
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN65LVDS179DGKR specifications
ParameterValue
TypeTransceiver
MountingSurface Mount
Supply voltage3V ~ 3.6V
ProtocolLVDS
Operating temperature-40°C~85°C
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
Data rate150Mbps
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Number of drivers (Receivers)1/1

Product details

Full duplex means separate transmit and receive pairs — no direction-pin toggling, no half-duplex turnaround delay.

150 Mbps — the link budget

At 150 Mbps the SN65LVDS179DGKR handles a 75 MHz clock or a serialised data stream like a 24-bit parallel video link running at 75 MHz pixel clock. The full-duplex architecture means the receiver stays live while the driver is active, so you get continuous data flow without bus-turnaround dead cycles. For a backplane or cable run, the LVDS signalling keeps common-mode noise rejection high and EMI low — no extra filtering needed for most industrial environments.

No last-time-buy notice, no end-of-life clock ticking. For a BOM that needs this transceiver, you are not scrambling for a substitute or stocking up on a sunset part.

Frequently asked questions

What is the data rate of SN65LVDS179DGKR?

The SN65LVDS179DGKR supports a data rate of 150 Mbps. That is the maximum serial bit rate per channel.