Skip to main content
Log in
SN65HVDA1040AQDRQ1

SN65HVDA1040AQDRQ1 CAN Transceiver, AEC-Q100, 1 Mbps, 8-SOIC

MPNSN65HVDA1040AQDRQ1
Active

Texas Instruments SN65HVDA1040AQDRQ1 automotive CANbus transceiver, half-duplex, 1 Mbps, 4.75V–5.25V supply, –40°C to 125°C, AEC-Q100 qualified, 8-SOIC package.

$2.3100Ref. price · indicative, final on quote
Texas Instruments SN65HVDA1040AQDRQ1 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SN65HVDA1040AQDRQ1 specifications
ParameterValue
TypeTransceiver
SeriesAutomotive, AEC-Q100
MountingSurface Mount
Supply voltage4.75V ~ 5.25V
ProtocolCANbus
Operating temperature-40°C~125°C
DuplexHalf
PackageTape & Reel (TR); Cut Tape (CT)
Data rate1Mbps
Case8-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis125 mV
Number of drivers (Receivers)1/1

Product details

Automotive CANbus physical layer — AEC-Q100 Grade 1 qualified

The Texas Instruments SN65HVDA1040AQDRQ1 is an automotive-grade CAN transceiver in an 8-SOIC package, specified for the 1 Mbps CAN 2.0 high-speed bus.

125 mV receiver hysteresis — bus noise margin for the automotive environment

The 125 mV hysteresis on the receiver inputs provides a defined switching threshold that rejects common-mode noise on the CAN bus — a practical concern in automotive harnesses where ignition noise and motor-drive coupling can corrupt the differential signal. This is a datasheet-typical figure that directly affects the bus's bit-error rate in a noisy electrical environment.

8-SOIC footprint — direct drop-in for standard CAN transceiver layouts

The 8-SOIC footprint matches standard CAN transceiver layouts.

Frequently asked questions

Is SN65HVDA1040AQDRQ1 AEC-Q100 qualified?

Yes. The part is listed under the Automotive, AEC-Q100 series, confirming qualification to the AEC-Q100 stress test specification for automotive-grade integrated circuits.