10 Mbps half-duplex RS-485 transceiver in a small 8-VSSOP
The receiver includes 30 mV of hysteresis for noise immunity on long bus runs. This is the 8-VSSOP (DGK) package variant of the 65HVD485 family, suited for space-constrained industrial interfaces where the bus wiring is often the weakest link.
Supply rail and bus voltage tolerance
If your backplane or sensor bus runs at 5 V, it fits. The transceiver is rated for RS-485 common-mode voltages of -7 V to +12 V on the bus pins, which covers most industrial ground shifts. The half-duplex architecture means a single twisted pair handles both transmit and receive, with the driver enable pin controlling direction.
Industrial temperature and package for field-mounted nodes
Surface-mount assembly is standard; no special handling beyond MSL precautions.