Texas Instruments SN65HVD266D CANbus transceiver, half-duplex, 2 Mbps data rate, 4.5V to 5.5V supply, -40°C to 125°C, 8-SOIC surface mount package.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 4.5V ~ 5.5V |
| Protocol | CANbus |
| Operating temperature | -40°C~125°C |
| Duplex | Half |
| Package | Tube |
| Data rate | 2Mbps |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 125 mV |
| Number of drivers (Receivers) | 1/1 |
At 2 Mbps the SN65HVD266D keeps up with CAN 2.0 B bit rates used in real-time actuator control and sensor networks. The 125 mV receiver hysteresis provides a clean switching threshold on a noisy bus — important when the cable run passes motor drives or switching power supplies.
Within TI's 65HVD266 family, other 8-SOIC variants share the same pinout and base functionality. The evidence does not list a specific alternate order code, but the base product number 65HVD266 indicates a common footprint across the series. For a validated second source, review the SN65HVD267 or SN65HVD268 if a different bus-fault tolerance or slope control is acceptable.