Skip to main content
Log in
SN65HVD253DR

SN65HVD253DR CAN Transceiver, 1 Mbps, 8-SOIC, Active

MPNSN65HVD253DR
Active

Texas Instruments SN65HVD253DR, DeviceNet™ CAN Transceiver, Half-Duplex, 1 Mbps, 4.75V~5.25V, 8-SOIC, -40°C~85°C.

$1.8390Ref. price · indicative, final on quote
Texas Instruments SN65HVD253DR datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN65HVD253DR specifications
ParameterValue
TypeTransceiver
SeriesDeviceNet™
MountingSurface Mount
Supply voltage4.75V ~ 5.25V
ProtocolCANbus
Operating temperature-40°C~85°C
DuplexHalf
PackageTape & Reel (TR)
Data rate1Mbps
Case8-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis160 mV
Number of drivers (Receivers)1/1

Product details

The 1 Mbps data rate covers the standard CAN 2.0 maximum bit rate, so this transceiver handles both DeviceNet and generic CAN networks without a throughput bottleneck. The 160 mV receiver hysteresis provides noise margin on the bus, which matters in electrically noisy industrial environments where ground shifts and coupled interference can corrupt a low-hysteresis receiver. The single driver/receiver pair (1/1) is the typical node count for a CAN transceiver; no surprises there. The 5 V supply rail is standard for CAN PHY layers, so it drops into existing 5 V-powered designs without a regulator change.

Lifecycle and supply reality

No last-time-buy risk here for new designs.

Frequently asked questions

Is the SN65HVD253DR a direct replacement for the SN65HVD251?

The SN65HVD253DR and SN65HVD251 are both 5 V CAN transceivers in 8-SOIC packages from TI, but they are not necessarily pin-compatible drop-in replacements without checking the datasheet. The SN65HVD253DR is specifically part of the DeviceNet series, while the SN65HVD251 is a general-purpose CAN transceiver. Verify the pinout and timing parameters before substituting.

Does the SN65HVD253DR support DeviceNet protocol?

Yes, the SN65HVD253DR is part of the DeviceNet series and supports the DeviceNet protocol, which is built on CAN 2.0. It operates at up to 1 Mbps, matching DeviceNet's maximum data rate.

Is the SN65HVD253DR compatible with CAN 2.0?

Yes, the SN65HVD253DR is a CAN transceiver that supports the CAN 2.0 protocol, as indicated by its CANbus protocol listing. It handles the standard 1 Mbps bit rate and half-duplex communication.