Texas Instruments Automotive AEC-Q100 SN65HVD251PE4 CANbus Transceiver, Half Duplex, 1Mbps, 4.5V~5.5V, -40°C~125°C, 8-DIP (0.300", 7.62mm), Through Hole, Tube.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Series | Automotive, AEC-Q100 |
| Mounting | Through Hole |
| Supply voltage | 4.5V ~ 5.5V |
| Protocol | CANbus |
| Operating temperature | -40°C~125°C |
| Duplex | Half |
| Package | Tube |
| Data rate | 1Mbps |
| Case | 8-DIP (0.300\", 7.62mm) |
| Receiver hysteresis | 100 mV |
| Number of drivers (Receivers) | 1/1 |
The single driver/receiver pair (1/1) maps to a typical CAN node interface — one TXD and one RXD connection to the controller. The through-hole 8-PDIP package (8-DIP, 0.300" width) is suited for prototyping, low-volume production, or designs where socketed installation simplifies field service.
Both are the same CAN transceiver die. The SN65HVD251PE4 is in an 8-PDIP through-hole package, while the SN65HVD251DR is in an SOIC-8 surface-mount package.
Yes.