Texas Instruments SN65HVD235D CANbus transceiver, half-duplex, 1 Mbps data rate, 3 V ~ 3.6 V supply, 8-SOIC package, -40°C ~ 125°C operating temperature.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 3V ~ 3.6V |
| Protocol | CANbus |
| Operating temperature | -40°C~125°C |
| Duplex | Half |
| Package | Tube |
| Data rate | 1Mbps |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 100 mV |
| Number of drivers (Receivers) | 1/1 |
It supports a data rate of 1 Mbps, matching the standard high-speed CAN bit rate used in automotive ECUs, industrial automation, and building controls. The device integrates a differential bus driver and receiver in an 8-pin SOIC package, with 100 mV of receiver hysteresis to reject bus noise and improve signal integrity on long or noisy cable runs.
Both are 3.3 V, 1 Mbps CAN transceivers in the same SOIC-8 footprint, but the SN65HVD235D adds 100 mV receiver hysteresis for improved noise immunity. Check the specific pinout and electrical specs in the respective datasheets; for most applications they are interchangeable, but the hysteresis difference may matter in high-noise environments.
The evidence does not list a shutdown or enable pin for the SN65HVD235D. The device is a basic half-duplex transceiver; for power-saving modes, consider a variant with standby or sleep capability.