Texas Instruments SN65HVD231DRG4, CANbus Transceiver, Half-Duplex, 1Mbps, 3V~3.6V Supply, 100mV Hysteresis, -40°C~85°C, 8-SOIC Package.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 3V ~ 3.6V |
| Protocol | CANbus |
| Operating temperature | -40°C~85°C |
| Duplex | Half |
| Package | Tape & Reel (TR) |
| Data rate | 1Mbps |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 100 mV |
| Number of drivers (Receivers) | 1/1 |
Rated for 1 Mbps, this transceiver meets the maximum data rate for CAN 2.0 networks, suitable for high-throughput message passing in factory-floor or equipment-level buses. The 100 mV hysteresis helps reject bus noise without external filtering in typical industrial environments.
Both are 3.3 V CAN transceivers in the same family, but the SN65HVD230 typically offers a standby mode with lower quiescent current, while the SN65HVD231DRG4 does not include that feature. Pin-compatible in the SOIC-8 footprint, but check the mode-control pin function if your design uses standby.