Skip to main content
Texas Instruments RC4560IP — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

RC4560IP Audio Dual Op-Amp, 15 MHz GBW, 5.5 V/µs Slew Rate

MPNRC4560IP
End of Life

Texas Instruments RC4560IP, Audio Dual Operational Amplifier, 15 MHz Gain Bandwidth, 5.5 V/µs Slew Rate, 4.3 mA Supply, 8-DIP Through Hole, -40°C to 85°C.

$0.6Ref. price · indicative, final on quote
RC4560IP datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

RC4560IP Technical Specifications
ParameterValue
Mounting typeThrough Hole
Amplifier typeAudio
Voltage - input offset500 µV
Voltage - supply span32 V
Current - supply4.3mA
Current - input bias40 nA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product15 MHz
PackageTube
Slew rate5.5V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Audio dual op-amp in a through-hole DIP

The RC4560IP is a dual audio operational amplifier from Texas Instruments in an 8-pin DIP package. It delivers a 15 MHz gain-bandwidth product and a 5.5 V/µs slew rate, drawing 4.3 mA supply current per amplifier. The part is explicitly characterized for audio signal paths — preamplifier stages, active filters, tone control circuits, and line drivers — where the combination of bandwidth and slew rate keeps harmonic distortion low across the audible spectrum. Supply range spans 4 V to 32 V single or dual supplies, and the output can source or sink 50 mA per channel, enough to drive headphones or line-level inputs directly. The industrial temperature range (-40°C to 85°C) covers rack-mount gear, mixing consoles, and outdoor audio installations.

Sourcing and availability

This part is sourced through independent distribution and quoted to order against an RFQ. Availability and current pricing are confirmed at quote time.

Frequently asked questions

Where can I buy RC4560IP?

RC4560IP is sourced to order through independent distribution. Submit an RFQ for current availability and pricing — stock levels and lead time are confirmed at quote time.

What is the slew rate of RC4560IP?

The RC4560IP has a slew rate of 5.5 V/µs, which supports full output swing up to approximately 88 kHz before slew limiting occurs.

What is the equivalent of RC4560IP?

The NJM4560 is a common functional equivalent — same dual audio op-amp in DIP-8, similar 15 MHz GBW and 5.5 V/µs slew rate. Verify pin compatibility and supply range for your specific application before substituting.

What package does RC4560IP come in?

The RC4560IP is supplied in an 8-DIP through-hole package (0.300 inch row spacing, 7.62 mm body width), shipped in tubes.